66-yeller¶

66-yeller is a powerful, specialized echo tool.

Interface¶

    66-yeller [ -h ] [ -d ] [ -s|S ] [ -1 file ] [ -2 file ] [ -z ] [ -n ] [ -c ] [ -p prog ] [ -v verbosity ] [ -i|w|W|t|T|f|F ] msg...

66-yeller writes the current system time, the name of the program, a colorized informative message (msg), depending on the options passed to one or two streams. By default, stream_1 points to stdout and stream_2 points to stderr. The \a, \b, \t, \n, \v, \f, and \r sequences are recognized in quoted strings, and are converted to the ASCII numbers 7, 8, 9, 10, 11, 12 and 13 respectively.

Exit codes¶

0 success
100 wrong usage
111 system call failed

Options¶

-h : prints this help.
-d : double-output. It writes on stream_1 and stream_2.
-s : switches streams. Stream_1 becomes stream_2 and stream_2 becomes stream_1.
-S : reads msg from stdin.
-1 file : redirects stream_1 to file. The file is opened for appending and created if it doesn't exist.
-2 file : redirects stream_2 to file. The file is opened for appending and created if it doesn't exist.
-z : enable color. If the stream_1 does not point to a terminal, the color is automatically disabled and the option has no effects.
-n : does not output a trailing newline.
-c : does not write the current sytem time. By default the current system time as an ISO timestamp. It can be set to a TAIN64(see Environment variable).
-p prog : use prog as the program name to display. By default 66-yeller tries to find the name of the calling process by reading and parsing the /proc/<pid>/comm file. This option tells to 66-yeller to use prog as the default program name to display.
-v verbosity: increases/decreases the verbosity of the command.
- 0: only print error messages.
- 1: also, print informative messages. This is the default.
- 2: also, print warning messages.
- 3: also, print tracing messages.
- 4: also, print function name and line code of the messages.
- 5: also, display the sequence of the current process function by function.
-i : does not write the informative message.
-w : prints a warning message.
-W : prints a warning message regardless the verbosity level. 66-yeller follows the exact same verbosity rule as any other 66 tools. A verbosity set to 1 will not write a warning message. This option forces 66-yeller to write a warning message even if the verbosity is less than 2.
-t : prints a tracing message.
-T : prints a tracing message regardless the verbosity level. 66-yeller follows the exact same verbosity rule as any other 66 tools. A verbosity set to 2 will not write a tracing message. This option forces 66-yeller to write a tracing message even if the verbosity is less than 3.
-f : prints a fatal message and dies with an 111 as exit code.
-F : prints a fatal message without dying.

msg color options¶

%w : set color to white
%b : set color to blue
%g : set color to green
%y : set color to yellow
%r : set color to red
%l : enable blinking
%n : reset color to normal

Default informative message format¶

A info(default) message will be:
```
    <sytem time> <prog>: info: <msg>
```
where info is written in green color.
A warning message will be:
```
    <sytem time> <prog>: warning: <msg>
```
where warning is written in yellow color.
A tracing message will be:
```
    <sytem time> <prog>: tracing: <msg>
```
where tracing is written in white color.
A fatal message will be:
```
    <sytem time> <prog>: fatal: <msg>
```
where fatal is written in red color.

Environment variables¶

The following environment variable can be set to configure the default 66-yeller behavior. The corresponding options set at commandline overwrite the environment variable.

PROG¶

Corresponds to the -p option. Specifies the name of the program to display.
VERBOSITY¶

Corresponds to the -v option. Specifies the verbosity level to use.
COLOR_ENABLED¶

Corresponds to the -z option. Tells to 66-yeller to use color. A value of 1 enable the color, where 0 disable it.
DOUBLE_OUTPUT¶

Corresponds to the -d option. Tells to 66-yeller to use double-output. A value of 1 switches on the double-output, where 0 switches off the double-output.
CLOCK_ENABLED¶

Corresponds to the -c option. Tells to 66-yeller to output the current system time. A value of 1 outputs the system time where 0 does not.
CLOCK_TIMESTAMP¶

Specifies the timestamp to use for the system time display. A value of 1 output the system time as ISO timestamp where 0 outputs the system time as TAIN64 timestamp.
REDIRFD_1¶

Corresponds to the -1 option. Redirects the stream_1 to its value(e.g. REDIRFD_1=/dev/console). A value of 0 resets the stream_1 to its default value.
REDIRFD_2¶

Corresponds to the -2 option. Redirects the stream_2 to its value(e.g. REDIRFD_2=/dev/null). A value of 0 resets the stream_2 to its default value.

Usage examples¶

Call 66-yeller from a terminal where the shell is zsh:

    % 66-yeller this is an info message
    2020-05-06 10:49:02.71 zsh: info: this is an info message

Same things but specifying the name of the program to print:

    % 66-yeller -p MyProg this is a warning message
    2020-05-06 10:49:02.71 MyProg: info: this is a info message

This following message will not be displayed:

    % 66-yeller -p MyProg -w this following message will not be displayed

Where this one will be:

    % 66-yeller -p MyProg -W this following message will be displayed
    2020-05-06 10:49:02.71 MyProg: warning: this following message will be displayed

Also, it can be:

    % 66-yeller -v2 -p MyProg -w this following message will be displayed
    2020-05-06 10:49:02.71 MyProg: warning: this following message will be displayed

Do not display the system time:

    % 66-yeller -c -p MyProg what time is it\?
    MyProg: info: what time is it?

Also do not display the informative message:

    % 66-yeller -ic -p MyProg what time is it\?
    what time is it?

Colorize the output where what will be displayed in red color and time in yellow color:

    % 66-yeller -ic %r what %y time %n is it\?
    what time is it?

Alos, it can be:

    % 66-yeller -ic %rwhat%y time%n is it\?
    what time is it?

Append a trailing newline and a tabulation:

    % 66-yeller -ic what "time\nis\tit?"
    what time
    is  it?

Use the double-output and redirects stream_2 to myfile file:

    % 66-yeller -d -2 myfile -p MyProg reads myfile to see again this message
    2020-05-18 09:33:16.47 MyProg: info: reads myfile to see again this message

Reads msg from stdin:

    % ls -la /tmp | 66-yeller -p MyProg -S
    2020-05-18 09:37:59.15 MyProg: info: total 840K
    2020-05-18 09:37:59.15 MyProg: info: drwxrwxrwt  6 root   root   220 May 18 09:07 ./
    2020-05-18 09:37:59.15 MyProg: info: drwxr-xr-x 19 root   root  4.0K May 16 09:13 ../
    2020-05-18 09:37:59.15 MyProg: info: drwxr-xr-t  2 root   root    40 May 18 06:57 .ICE-unix/
    2020-05-18 09:37:59.15 MyProg: info: drwxrwxrwt  2 root   root    60 May 18 06:57 .X11-unix/

Reads message from stdin. Does not display informative message and the system time. Uses double output and redirects stream_2 to myfile

    % ls -la /tmp | 66-yeller -cdi2 /tmp/myfile -S /tmp contents "->"
    /tmp contents -> total 844K
    /tmp contents -> drwxrwxrwt  6 root   root   240 May 18 09:40 ./
    /tmp contents -> drwxr-xr-x 19 root   root  4.0K May 16 09:13 ../
    /tmp contents -> drwxr-xr-t  2 root   root    40 May 18 06:57 .ICE-unix/
    /tmp contents -> drwxrwxrwt  2 root   root    60 May 18 06:57 .X11-unix/

Use 66-yeller in a sh script called script.sh with a pre-defined behavior set by the environment variables:

    #!/bin/sh
    export PROG=my_awesome_script
    export VERBOSITY=2
    export DOUBLE_OUTPUT=1
    export REDIRFD_2=/tmp/my_awesome_script.log

    set -e

    if ! [ -e /etc/66/init.conf ]; then
        66-yeller -f "file /etc/66/init.conf doesn't exist"
    else
        cat /etc/66/init.conf | 66-yeller -Sic "%y->%n "
    fi

    if ! [ -e /etc/66/toto.conf ]; then
        66-yeller -f "file /etc/66/toto.conf doesn't exist"
    else
        cat /etc/66/toto.conf | 66-yeller -Sic "%y->%n "
    fi
    66-yeller you will never see this message

    % ./script.sh
    -> VERBOSITY=0
    -> LIVE=/run/66
    -> PATH=/usr/bin:/usr/sbin:/bin:/sbin:/usr/local/bin
    -> TREE=boot
    -> RCINIT=/etc/66/rc.init
    -> RCSHUTDOWN=/etc/66/rc.shutdown
    -> RCSHUTDOWNFINAL=/etc/66/rc.shutdown.final
    -> UMASK=0022
    -> RESCAN=0
    -> ISHELL=/etc/66/ishell
    2020-05-18 09:57:16.83 my_awesome_script: fatal: file /etc/66/toto.conf doesn't exist

    % cat /tmp/my_awesome_script
    cat /tmp/my_awesome_script.log
    -> VERBOSITY=0
    -> LIVE=/run/66
    -> PATH=/usr/bin:/usr/sbin:/bin:/sbin:/usr/local/bin
    -> TREE=boot
    -> RCINIT=/etc/66/rc.init
    -> RCSHUTDOWN=/etc/66/rc.shutdown
    -> RCSHUTDOWNFINAL=/etc/66/rc.shutdown.final
    -> UMASK=0022
    -> RESCAN=0
    -> ISHELL=/etc/66/ishell
    2020-05-18 10:03:28.94 my_awesome_script: fatal: file /etc/66/toto.conf doesn't exist

66-yeller¶

Interface¶

Exit codes¶

Options¶

msg color options¶

Default informative message format¶

Environment variables¶

PROG¶

VERBOSITY¶

COLOR_ENABLED¶

DOUBLE_OUTPUT¶

CLOCK_ENABLED¶

CLOCK_TIMESTAMP¶

REDIRFD_1¶

REDIRFD_2¶

Usage examples¶